TGT Index Page

Superior Compressed Natural Gas
Dispensers, Parts, & Service

CNG Dispensers   Refueling Station Photos   HOME

One Hose Stand Alone Transit CNG Dispense

This dispenser is a single-line dispenser that meters the gas and gives you a display on both sides of the dispenser. The dispenser has 1, 4-20mA output that can send flow or temperature to a remote controller. The dispenser has a 120VAC hook switch for an "in use" signal and will send pulses to a card reader or a console. The Micro Motion ® sensors and Transmitters are located within the dispenser body and are factory set up and calibrated before shipment. TGT assembles an AGA 1-93 approved Parker Parflex CNG fill hose on all its dispensers. The Breakaway is the Sherex In-Line type with a unique vent Breakaway attached to the fill hose breakaway. All TGT CNG Dispensers have an ASME pressure relief valve inside the dispenser cabinet with a vent stack up through the dispenser body. The cabinet is constructed of 11-gauge cold roll steel with a powder-coated finish; stainless steel material is optional. The high body style gives you the look of contemporary gasoline dispenser. The standard color is black but any custom colors can be applied to the dispenser body. This dispenser is rated for a MAWP of 4500psi. This dispenser will temperature compensate the fill using the Acufill fill algorithm. It will also supply the compressor with a dry contact or a 120VAC output as an in-use signal.

Contact us for pricing information      

Each Include:
1   Manual shut off valve 3/4" port Sequencing Valves
1   Inline Sherex hose break away
1   Sherex CT5000 Nozzle
1   Automatic air operated ball valve with 3/4" port
1   3/4" x 3/8" fill hose
1   ASME Relief Valve installed in dispenser body and vented out top
1   Parker Finite J6 Filter. grade 4 element
1   Micro Motion CNG 50 Meter rated for 185lbs per minute
1   6000 psi pressure gage
1   Pit box to support dispenser in concrete
1   TGT Display electronics with backlighted displays

Tubing inside dispenser 3/4" .095 seamless stainless steel ASTM A269 or A213 Equivalent
4500 PSI working pressure


Two Drop Sequencing Solenoid Valve Panel Remote from Dispenser
Two Drop Sequencing " Ball Valve Panel Remote from Dispenser
NGV1 Type 2 Refueling Connector Nozzle (Staubli)
NGV1 Type 1 Refueling Nozzle Sherex CT1000
2 Parker Finite J2SD Filters Installed in Dispenser w/ Block and Bleed Valves
Stainless Steel Body with powder coat paint
Pressure Regulator used when dual pressure and elevated storage
Upgrade to " Hose
High Flow Rate Nozzles call for quote

This dispenser is manufactured under the guidelines of:
ANSI/IAS NGV 4.0-1999 CSA 12.00-M99
ANSI B31.3
CE (on request)

Contact us for pricing information      

Requires Acrobat Reader
7000 Series Flyer

TGT Dispensers
At Work

Tulsa Gas Technologies        4809 S. 101st E. Ave.        Tulsa, OK 74146        (918) 665-2641
WarePig Web Site Design

© Copyright Tulsa Gas Technologies